• Small dimensions and lightweight

• Loud alarm easy to get your attention

• Plugs into any standard servo channel

• Works with AM/FM PPM or FM/PCM R/C systems

• Suitable Controller: All PPM/FM, PCM/FM, AM Tx/Rx
  

• Low current consumption: < 35 mA (1 mA at standby mode)

• Weight: approx. 4.7g

• Alert Level: 85dB

• Voltage: 4-6 volts DC

• Loud: >85dB alarm
  

• Can be heard in 50 meter distance

Direction:

• Connect the lost alarm between the servo (the one which runs when flying) and the receiver, i.e. act as a servo extension cord 

• Turn on your transmitter and receiver then you will hear two beep sound  

• Do not move any of the control stick on the transmitter for 1 minute or simply turn it off 

• You will hear a continuous beep sound after 1 minute 

• It will stop once you move the control stick or power off the receiver
  

• If you ignore the continuous beep sound for around 2 minutes, the beep sound will change to a louder V sound 

• If you cannot find you plane, do not move the control stick or turn off your transmitter for 1 minute for the alarm sound 

• You will be able to locate your RC plane / Helicopter by the tracking sound

• To stop the alarm: move the control stick or Power off the receiver 

• Note: please make sure the correct polarity