• Used to test the condition of the touch screen digitizer or LCD display, whether it is good or bad, workable or unworkable

• Power adapter and PCB boards are included for facilitating your testing

• With LED power indicator  
  

• Portable and lightweight design, easy to carry and store

• Easy to operate

Operation:

• Turn on the Power Switch Button

• Power source - USB power (not included) input or the attached power adapter (recommend using external power)

• Turn on Switch Button

• Insert the testing PCB board into the tester, then link the LCD or touch screen digitizer to the PCB board. Remember to link tightly for better testing

• After it is well-linked and powered, if the LCD or digitizer is in good condition, clear picture will be displayed on the screen; if it is in bad condition, it will display abnormally

• Press Last/Next Buttons to check the previous / next pictures

• Press Model Change Button to choose the model you want

• Press LCD Display / Touch Screen Digitizer Interchange Button to choose the function you want
  

• After finishing testing, press Switch Button and Power Switch Button again, then take out the PCB board and touch screen digitizer

Note: Software Update Button and J1 J2 J3 Buttons are used for internal debugging, which can not be pressed wrongly.