• Water cooling

• Waterproof design (Need to use 704 silicone rubber by yourself)

• Super simple boat with a limited range of programming functions, plug and play

• A perfect ESC for those looking for something simple to use and economic

Specifications: 

• Cont current: 60A

• Burst current: 70A

• BEC model: Linear

• BEC output: 5V/3A

• Recommend battery: Li-ion/Lipoly 2-4S; Ni-MH/Ni-Cd 6-18NIMH

• Cooling: Watercooled

• ESC weight: 52g

• ESC size: 73mm * 36mm * 15mm

Phrases 1 Enter Programming Mode:

• Connect your motor and receiver to the speed controller, but do not connect the battery yet

• Turn on your transmitter and move the throttle stick to the full throttle position (full up). Please note: most futaba transmitters have the throttle channel reversed by default

• Connect your battery and controller, it will initialize with a musical tone

Phrases 2 Programming:

• After 3 seconds, the controller will start beeping a sequence of tones, a musical tone followed by one or more beeps. Each sequence represents a parameter that you can program and is repeats 3 times

• The parameters are:

• Music tone + 1 beep: Optionas 1. Cell type and No. of cells

• Music tone + 2 beep: Optionas 1. Throttle setting

• Music tone + 3 beep: Optionas 1. Brake setting/throttle type (for Heli)

• Music tone + 4 beep: Optionas 1. Direction and cutoff type

• Music tone + 5 beep: Optionas 1. Timing mode

User programming options:

• Cell Type: NiMH/NiCD/Lipoly/Li-ion

• Cell Count: 2S-4S/6-18NIMH

• Throttle Setting: Auto/Soft/Hard

• Brake: No Brake/Soft/Medium/Hard

• Direction: Clockwise/Counter Clockwise

• Cut off: Soft/Hard

• Timing: 1o/7o/15o/30o

• PWM: 8Khz/16kh